Great! [Two-Stage / GS Designs]
❝ Phantastic! Should be put in the same drawer like “TOST is not valid in Nanjing – use the I Ching instead.”

❝ See also this thread and ElMaestro’s wonderful Pt.
The post is about method B or C. However, here the thing is bit different. What I forgot to mention is that after sending out synopsis based on method C one of the comments I got, apart from "not valid in Europe

I don't know how many ways we can interpret this phrase. Since Potvin's methods are all somehow based on power evaluation in its flowchart so may be this is the reason they say "not valid ..."? Anyway, this is the reason we changed synopsis to use another method without power evaluation as I mentioned.
❝ BTW, you are not alone (see this post).
Don't know if that's comforting or frustrating.

❝ Seems that some regulators believe sic in B, but then they should be happy with the even more strict method D as well. Or are they really thinking that α 0.0294 is a universal constant?
If they don't like power evaluation in the flowchart, B and D should also be unacceptable to them.
❝ Great. This is not even Method B (abandoning the power estimation step).
Nope. We knew that and did it deliberately to avoid power evaluation.
❝ If the agency accepted your method without an intermediate power estimation they should ask themselves which risk to patients they are actually accepting.
Don't know if there's some kind of pact here (this is a BE for certain SUPAC and I'm not the one contact the agency). We were warned that the agency accept this study only in this specific country. It implied that the design might not be valid in other EU countries. It's a little bit complicate so I don't want to go to details.
❝ • For example, using 94.12% confidence intervals for both the analysis of stage 1 and the combined data from stage 1 and stage 2 would be acceptable, …
❝ That’s Method B!
My understanding is different. B involve power evaluation as well (After BE failed in stage 1, there's a step of evaluation power to determine if it should be stopped (Pt>= 80%) or continue (Pt<80%). What I understood from the guideline is that no power evaluation is involved in this example.
❝ ❝ Hi Helmut, it was nice talking to you in Budapest last month by the way.
❝ Same with me. Enjoyed especially the talks outside in the smoker’s Ghetto.


❝ Your memory is correct; see this post. The BfArM (not in Europe according to the BSWP?) had no problems with Method C. Maybe it’s worthwhile noticing that two of the studies were submitted to Berlin’s IECs. Member was Prof. Joachim Röhmel (1990–2004 head of the biostatistical department of the BfArM and an expert in adaptive designs).
That's good to know. I didn't find this post before. Thanks.
Shuanghe
All the best,
Shuanghe
Complete thread:
- Sequential designs, draft FDA guidance Loteprednol ElMaestro 2012-07-03 18:33 [Two-Stage / GS Designs]
- What the heck? Helmut 2012-07-03 19:25
- some unofficial opinion with this regard in Europe Shuanghe 2012-07-04 09:07
- Great! Helmut 2012-07-04 15:43
- Great!Shuanghe 2012-07-05 13:48
- Potvin & Montague not acceptable at all?! Helmut 2012-07-05 14:57
- Powerless Potvin & Montague? d_labes 2012-07-05 16:11
- Example w.o. intermediate power Helmut 2012-07-06 02:06
- Example w.o. intermediate power d_labes 2012-07-06 08:13
- Sims w.o. intermediate power Helmut 2012-07-26 16:20
- Example w.o. intermediate power Helmut 2012-07-06 02:06
- Potvin & Montague not acceptable at all?! ElMaestro 2012-07-05 16:20
- Sims? Helmut 2012-07-05 16:36
- Powerless Potvin & Montague? d_labes 2012-07-05 16:11
- Potvin & Montague not acceptable at all?! Helmut 2012-07-05 14:57
- Great!Shuanghe 2012-07-05 13:48
- Great! Helmut 2012-07-04 15:43
- some unofficial opinion with this regard in Europe Shuanghe 2012-07-04 09:07
- What the heck? Helmut 2012-07-03 19:25